Hayward

Hayward provides the best pool experience by offering elite water equipment. The entire product line is engineered to last exceedingly well. Hayward produces technologically advanced parts that are designed to make your life easier. A list of Hayward’s pool filter parts include gaskets, unions/nuts, plugs, o-rings, replacement cartridge elements, valves, and different tank parts. Hayward’s pool filter is a vital component in keeping your pool operational. The three categories of Hayward filter parts for your pool water are cartridge, sand, and diatomaceous earth (DE). In each system, the Hayward pool filter part executes the same function but through different means of action. In all three cases, the filter’s main purpose is to catch the debris that has gotten into the pool and remove the dirty particles from further contaminating the water. The best Hayward pool filter parts efficiently operate, playing a significant role in the optimization of the circulatory system.  

If your gauge does not read zero when your pool pump is off, you need to repair your Hayward pool filter with a new part. In Canada, Hayward pool filter parts are more susceptible to warping and natural corrosion because of the harsh weather conditions. Especially in cases of outdoor pools above ground or inground, Hayward pool filter parts are working overtime to ensure the safety and health of your pool meet its standards.

The first of the three filters is the Hayward cartridge filter part. It is the simplest in design because it has the fewest parts. It does not have a backwash value so without this Hayward pool filter part, the likelihood of a problem is vastly decreased. The filter process is done so by the water coming in the filter tank through the intake elbow, then passing through the bottom collector manifold. Once restored, the water exits the filter tank through the lower outlet. The tank as a Hayward pool filter plumbing part is under a lot of pressure both literally and metaphorically. If any of the bulkhead parts become loose or crack, or if the clamp were to give way, the tank could blow apart. Hayward pool filter replacement parts would be necessary. In addition, with each cleaning, filters lose their dirt trapping ability because the fibers weaken and separate. This is normal wear and tear that occurs naturally over time.

The second most common Hayward pool part is the sand filter. Sand filters work by firstly, allowing water to enter the tank through a distribution baffle. It then spreads the incoming water pressure evenly throughout the freeboard. When it comes in contact with the sand bed, the filter abstracts any dirt, oils, and particles to remove before reentering the pool. Parts such as the multiport valve, the o-ring, and the spider gasket are important and will require Hayward pool sand filter replacement parts if not treated properly. Make sure not to close your valve after the filter and not to plug your pool wall returns too tightly. The accurate measurement on the sizing of your pump is key to prevent blowing the dirt right through the sand bed and back into the pool.

The third Hayward pool filter part for sale is the DE filter. Of the three, this is the more complex device because it has so many parts. Nevertheless, mechanically, it is straightforward. Water enters through the bottom inlet pipe or underdrain assembly, and is pushed through the filter grids. These grids are coated with DE filter powder which enables it to catch the tiniest particles so your water reflects a crystal clear blue colour. When cleaning, be careful that the grid assembly doesn’t fall over, which can crack the manifold.  

Hayward supplies pool filter parts and accessories for all sizes and shapes of every sort of swimming pool. Shop near you to find the Hayward pool filter part that best fits your water needs!